| Parameter table of air blast zero gas consumption regenerative dryer |
| Model | Handling capacity Nm³/min | Inlet and outlet flange size | Rated power KW | L mm | W mm | H mm | Heater power（kw） | Blower power（kw） | weight Kg |
| HBGADZ-18 | 18 | DN65 | 15 | 2600 | 1750 | 2800 | 12 | 3 | 4000 |
| HBGADZ-25 | 25 | DN65 | 21 | 2600 | 1800 | 2900 | 18 | 3 | 4300 |
| HBGADZ-30 | 30 | DN80 | 29.5 | 2700 | 1800 | 2950 | 22 | 7.5 | 4600 |
| HBGADZ-40 | 40 | DN100 | 39.5 | 2850 | 1900 | 3000 | 32 | 7.5 | 4960 |
| HBGADZ-50 | 50 | DN125 | 43.5 | 2900 | 1950 | 3150 | 36 | 7.5 | 5155 |
| HBGADZ-60 | 60 | DN125 | 54 | 3000 | 2000 | 3200 | 45 | 9 | 5560 |
| HBGADZ-70 | 70 | DN125 | 57.5 | 3150 | 2000 | 3235 | 45 | 12.5 | 5980 |
| HBGADZ-80 | 80 | DN150 | 67 | 3350 | 2100 | 3350 | 52 | 15 | 6100 |
| HBGADZ-100 | 100 | DN150 | 83 | 3650 | 2800 | 3400 | 68 | 15 | 6685 |
| HBGADZ-120 | 120 | DN150 | 98.5 | 3850 | 2800 | 3500 | 80 | 18.5 | 8000 |
| HBGADZ-150 | 150 | DN150 | 100.5 | 3900 | 3000 | 3500 | 82 | 18.5 | 8650 |
| HBGADZ-180 | 180 | DN200 | 137 | 4300 | 3200 | 3600 | 115 | 22 | 9630 |
Product principle introduction:
The air blower with zero air consumption is used to extract the ambient air, which is heated by the heater to regenerate the adsorbent. During cold blowing, the air blower is used to extract the ambient air and is cooled by the cooler for internal circulation. There is no compressed air loss in the regeneration process
Standard technical parameters:
1. Rated air inlet temperature: ≤ 40 ℃
2. Rated working pressure: 0.6-1.0mpa
3. Ambient temperature: ≤ 45 ℃
4. Air dew point: - 40 ℃ (0.7MPa) (customized below - 60 ℃)
5. Regeneration gas consumption: 0%
6. Pressure loss: ≤ 0.02MPa
7. Oil content of intake air: ＜ 0.1mg/m3
8. Installation method: indoor, without foundation, concrete ground leveling, reserved maintenance and operation space
9. Adsorbent: activated alumina, molecular sieve
10. Air inlet condition of blower: 38 ℃ (RH = 65%)
10. Power supply: 380v-3ph-50hz
11. Users can optionally configure customized products, and consult our technical service department for detailed technical parameters
Design features:
1. Pure logic intelligent control, temperature participation control, optimization of operation cost, monitoring of important operation parameters of dryer.
2. Accurate action, stable performance and simple operation
3. The inner wall of the cylinder shall be subject to professional antirust treatment, and shall not be rusted for 10 years
4. Stainless steel diffuser is corrosion-resistant, wear-resistant and durable
5. The stainless steel valve works stably, and its service life is up to 500000 times
6. Equipped with high temperature protection device, low power density stainless steel electric heater, high temperature control accuracy, low risk, long service life
7. The heater of adsorption tower is used as thermal insulation layer to reduce heat loss and energy consumption
8. Famous brand blower is adopted, with stable performance and low energy consumption
9. Reasonable shock absorption design of blower to effectively reduce noise level
10 use natural environment air, internal circulation cold blowing, regeneration zero gas consumption
11. Temperature controlled regeneration and cold blowing
12. Frequency conversion with delayed adsorption technology is more energy-saving (optional)
中文
ENGLISH